Who has a Maggie?

[FROROCKS]

Who on here has one. And which one do you have? M112, M122, Or MP1900 TVS? What supporting mods. if any and was there anything you had to do (different strut bar, remove the hood insulation) for the fit?
Thanks in advance.

[FROROCKS]

Originally Posted by FROROCKS

Who on here has one. And which one do you have? M112, M122, Or MP1900 TVS? What supporting mods. if any and was there anything you had to do (different strut bar, remove the hood insulation) for the fit?
Thanks in advance.

I guess not to many on here have FI. (crickets)

Well I finally pulled the trigger. I ordered and received my new power adder and tomorrow I take the GTO in for a new exhaust. Doing a Flowmaster custom 3" mandrel bent cat-back, resonator delete w/scavanger replacement, and keeping the stock tips w/super 40s.

Here some pictures of the maggie.
[IMG][/IMG]

[IMG][/IMG]
[IMG][/IMG]

I won't being doing the install till my vacation, 2nd week in June. Just in time for summer.

[Orbit Orange]

I'm jealous.

Let us know how the install goes. Save some money for tires.



Never pay again for live sex! | Hot girls doing naughty stuff for free! | Chat for free!

[cncmasterofor]

Nice! Very nice...

[FROROCKS]

So I'm taken my GTO in Monday for the supercharger install. I was told to take out the Predator tune and reinstall the stock tune, before he does the install and dyno-tune. And I must say what a difference in performance it is. I've had the Predator for a couple of years and you just get used to it. Granted the Predator tune probably leaves some hp on the table, it is much better than the stock.

[cncmasterofor]

Originally Posted by FROROCKS

So I'm taken my GTO in Monday for the supercharger install. I was told to take out the Predator tune and reinstall the stock tune, before he does the install and dyno-tune. And I must say what a difference in performance it is. I've had the Predator for a couple of years and you just get used to it. Granted the Predator tune probably leaves some hp on the table, it is much better than the stock.

Who is doing your tune?

[FROROCKS]

Shelleys Performance. I ran into another goat owner, who had them put on a M112, and recommened them. I didn't even know we had a shop w/a dyno nearby. I would have gotten a dyno-tune instead of the Predator.

[GTOROB]

Have you installed it yet? If so,what numbers did your car put down?

[FROROCKS]

Originally Posted by GTOROB

Have you installed it yet? If so,what numbers did your car put down?

The Goat goes in tomorrow, they will do a base dyno run and start the tear down. We're hoping around 500rwhp.

[cncmasterofor]

Originally Posted by FROROCKS

Shelleys Performance. I ran into another goat owner, who had them put on a M112, and recommened them. I didn't even know we had a shop w/a dyno nearby. I would have gotten a dyno-tune instead of the Predator.

Good to hear there is someone near by. I guess Ellis and or TJ is a bit of a drive for ya.


Waiting on dyno sheet!

[FROROCKS]

Well I handed over the keys, I hate leaving my car somewhere besides my garage. Had the baseline dyno run, with stock tune, K&N air-charger, and the new Flowmaster cat-back. I put down 339.49 hp and 331.76 tq. Run conditions: 70.48deg.F. 28.00 in-Hg. Humidity 51%. SAE:1.06. Hoping to have her done by Wednesday!

Oh and on a bad side note, got a speeding ticket on the way there! Not the way I wanted to start my vacation. And I was playing it cool on the way there. I went to pass a car to get in the correct lane for the off ramp and he nails me for it. Said I should have slowed down and then pulled in behind the slower car to make the lane change. So as I'm sitting there waiting for the officer, I think to myself, here I am getting a speeding ticket on the way to put on a supercharger!?!
And as soon as he hands me the ticket, he walks back to his bike, pulls out his lazer gun, tags another car, and points them over. What a d!ck, it's all about revenue.

[cncmasterofor]

Any updates? Any rubbing on the strut tower bar and or hood?
Sucks about the ticket.

[FROROCKS]

Originally Posted by cncmasterofor

Any updates? Any rubbing on the strut tower bar and or hood?
Sucks about the ticket.

Well we're waiting for the ECM and the BCM. The shop owner wanted to get atleast a base tune from Magnuson, so he sent them the modules. Should be here today.
I'm going to stop by and take a look later today, after a friend and I go look at some new camaros. He want's to see one up close. I on the other hand, would'nt mind seeing one, but not to make a special trip. I'm done with GM.

[walterGT67]

So how did it go?

Any update??

[FROROCKS]

Originally Posted by walterGT67

So how did it go?

Any update??

I should be able to update the info when I get home tonight. All I can say is that it was a beast before, now it's a Super-beast!