Ditched the tail pipe heat shield today
Chalk this one up to noise and weight reduction. I was getting an irritating vibration/buzz from the rear at certain rpm's. Thought it might be coming from the thin aluminum "heat" shield in the back. Pulled it off (3 bolts) and the noise was gone. It probably only weighs 1 or 2 pounds so don't think it's good for real weight reduction. Also my SLP tips are probably 1/2 inch from the rear outlet plastic with no signs of melting so I doubt that this will affect the plastic on top of the exhaust seeing it is about 9 inches away. (Chalk that one up to GM overengineering) This one is for the '04 guys, I don't know if there are 2 for the 05/06 guys or not. I'll leave the other shielding on around the cats though. 
Never pay again for live sex! | Hot girls doing naughty stuff for free! | Chat for free!
__________________
2004 GTO: IBM/Blue A4 (1 of 369)
K&N CAI, JBA shorty headers & catted mids, SLP LM1, Pred. tuner, ported stock TB and MAF ends, Derale trans pan cooler, 180 Tstat, TB coolant bypass, Hankook Ventus V12's, King 0" drop rear springs, drag bags, Monroe Sensa-Trac rear shocks, SLP rear sway bar w/ end link bushings, Lovell's RR bushings, BMR skidplate, tow brace delete kit, DEPO black tail lamps, SCSS pod w/Aeroforce gauge
To view links or images in signatures your post count must be 10 or greater. You currently have 0 posts.
|
Your Privacy Choices